Declaration Of Conformity; Specified Conditions Of Use; General Safety Information; Special Safety Instructions - Metabo FP 18 LTX Originalbetriebsanleitung

en ENGLISH
Original instructions
12.

1. Declaration of Conformity

Under our sole responsibility, we hereby declare
that these compressed air grease guns, identified
by type and serial number *1), meet all relevant
requirements of directives *2) and standards *3).
Technical documents for *4) - see Page 3.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 4,
hereby declare under sole responsibility that this
metal weld bead remove, identified by type and
serial number *1) on page 4 of the Original Instruc-
tions, fulfil all relevant provisions of following UK
Regulations *2) S.I. 2016/1091,S.I. 2008/1597, S.I.
2012/3032 and Designated Standards *3) on page
3.

2. Specified Conditions of Use

The grease gun is suited for greasing lubrication
points on metal and similar materials that are
usually lubricated with grease guns. Commercially
available grease in cartridges or containers
suitable for use in grease guns must be used.
This appliance may only be used as intended.
Any other use does not comply with the intended
purpose.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.

3. General Safety Information

For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Always include these documents when passing on
your power tool.

4. Special safety instructions

4.1 Safety instructions for cordless grease
gun
- The tool must be held with a firm grip.
10
- Do not operate the tool near flames. The grease
could be flammable.
- Observe the requirements of the operating
instructions for the lubricants.
- Do not carry the tool by the flexible hose or the bar
handle.
- Check the flexible hose for damage before each
use. Do not use a damaged or kinked hose.
- Before each use, check the flexible hose for
permeability.
The hose must not be clogged!
- Check that all elements attached to the unit are
firmly in place.
- Check the safety devices before operation as
described in the instructions.
- Read and follow the grease manufacturer's
instructions before use.
- Keep hands and clothing away from the bar of the
bar handle (15).
Danger of crushing – wear work gloves!
-Wipe off any grease adhering to the tool to
prevent it from slipping and thus causing injuries.
- Do not forcefully bend or compress the flexible
hose. This can cause the hose to break or become
deformed.
- Use only a hose specified by Metabo.
- The environment in which the power tool is used
must be well-lit, adequately ventilated and dry.
- When using the grease gun, make sure you
maintain a healthy posture.
Vibration emission during actual use of the power
tool may differ from the indicated emission values
depending on the way the tool is used, and
specifically depending on the type of workpiece
being processed.
WARNING – Safety measures must be
established to protect the user on the basis of
an estimate of the degree of danger under the
actual conditions of use.
Wear safety goggles.
Wear a suitable protective mask.
CAUTION Do not stare at operating light.
4.2Safety instructions for battery packs
Remove battery pack from machine,
before any adjustment or maintenance is carried out.
Make sure that the tool is switched off before fitting the
battery pack.
Protect battery packs from water and
moisture!
Do not expose battery packs to fire!