Operation; Charging Process - Kärcher Charger Battery Power 4 V Bedienungsanleitung

Charging bay
4
Battery terminals
5
Charge level indicator (LED display)
6
Note
The charger has a charging bay with a standard charging function.
Two battery packs can be quickly charged in parallel (at the same time) in the Duo quick charger.
(See chapter "Technical data")
1. Plug the plug-in power supply into the mains socket.
2. Push the battery pack into the charging bay of the charger.
Illustration B
The charger briefly shows the current charge level of the battery pack. The charging process then starts auto-
matically.
(see chapter "The LED display of the charger")
3. Remove the battery pack from the charger after charging.
4. Unplug the plug-in power supply from the socket.
Note
The charged battery pack can remain in the charger until it is used. There is no danger of overcharging.
Avoid unnecessary energy consumption and unplug the charger when the battery pack is fully charged.

Operation

Charging process

English 19