Cleaning And Maintenance - Tomado TM-1802 Bedienungsanleitung

• Fill the kettle with water to between the minimum
and maximum mark. Too little water will result in the
kettle switching off prematurely, and too much water
may result in the kettle boiling over.
• Close the lid.
• Place the jug on the base.
• Insert the plug into a plug socket.
• Switch the appliance on by pressing the on/off switch
under the handle downwards. The indicator light will
illuminate. As soon as the water boils, the kettle will
switch off automatically and the on/off switch will
move to the upward position.
• If desired, boil the water one more time. Wait for
at least 30 seconds, however, after the kettle has
switched off automatically.
• Pour the water out slowly. If the kettle is accidentally
switched on while empty, the boil-dry protection will
automatically switch it off.
• After use, remove the plug from the wall socket.
CAUTION!
If the kettle is filled above the maximum level, boiling
water may splash out.

CLEANING AND MAINTENANCE

WARNING
Before cleaning the appliance, always switch it off,
remove the plug from the wall socket and allow it to
cool down completely.
Instruction
Cleaning
• Do not clean the appliance with an aggressive or
abrasive cleaner, nor with a sharp object, such as a
hard brush or a knife.
• Clean the exterior of the jug with a damp cloth.
• Always clean the base with a dry cloth.
Descaling
Descale the appliance regularly. Depending on the
hardness of the water, scale deposits may become
attached to the inside of the appliance. The harder
the water, the more often the appliance should be
descaled.
• Use a descaling product intended for household
appliances.
• Follow the instructions on the packaging.
• Do not switch on the kettle during descaling. The
descaler should be applied in cold water.
• After descaling rinse the kettle a few times with clean
water.
STORAGE
• Store the appliance in a clean, dry location.
manual TM-1802
21