Application Conditions; Setting And Operation - Aqua Forte Rd352 Gebrauchs- Und Installationsanleitung

4.5 Application conditions

Ambient temperature
Water temperature
Salt pools
Humidity
Altitude
Installation
Insulation

5. SETTING AND OPERATION

.
5 1 Display on control panel:



Indoor installation, temperature range: -10~42℃
5℃~50℃
Salt concentration up to 0.5%, i.e 5g/l
≤90% RH, （20℃±2℃）
Not exceed 1000m above sea level
The pump can be installed max. 2m above water level
Class F, IP55
① Power consumption
② Running capacity / Flow rate
③ WIFI indicator
④ Unit of flow
⑤ Timer period

⑥ Timer 1/2/3/4


(capacity/flow/time)
Inverter Mode
Manual-Inverter Mode: The running capacity will be
set manually between 30%-100%
Auto-Inverter Mode: The running capacity will be
automatically adjusted between 30%-100% according
to the preset flow rate.
The default mode is Manual-Inverter mode.
Backwash/unlock
Up/down: to
Switch between Manual-Inverter Mode and Auto-
Timer setting
On/off
change the value
5