Bestway LAY-Z-SPA SAN FRANCISCO HYDROJET PRO Gebrauchsanweisung Seite 11

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency of Wi-Fi: 2412~2472MHz
• Transmitter maximum output power of Wi-Fi: 18dBm
• Transmitter working frequency of Bluetooth LE:
2402~2480MHz
• Transmitter maximum output power of Bluetooth LE: 8dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• Using an extension lead or multi plug adaptor with the spa
heater can cause the plug to overheat, causing damage to the
equipment and surrounding items. The spa is a class I
electrical appliance and must be connected directly to a
grounded socket. It is recommended to only use a socket
which is resistant to humidity and capable of high-power
loading. Regularly check the plug and socket for signs of
damage before using the spa – do not use the spa if the plug
or socket is damaged. If you are unsure about the quality of
the electrical supply, please consult a qualified electrician
before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
DISPOSAL
Electrical products should not be disposed of with
household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
11