Assembly - PLAYKIN FASTER Betriebsanleitung

ASSEMBLY

ATTENTION: The assembly must be carried out by an adult. Keep children away during
assembly, the product contains small parts that can cause asphyxiation. pay special
attention to protective materials and packaging bags.
Make sure the ignition switch is "OFF" before mounting the product.
Before first use, charge the battery for at least 4 to 6 hours.
Required mounting tools:
Screwdriver (not included)
ASSEMBLY THE FRONT MUDGUARD AND PROTECTOR
1. Place the face shield on the front fork tubes.
2. Insert four Ø4x12 screws and tighten the
screws with a screwdriver.
4
1
3
51
Wrench Socket Wrench
3. Place the front mudguard on the
front fork.
4. Insert a Ø4x12 screw through the
front mudguard
front fork tube, and tighten with a
screwdriver on each side.
2
Front fork
tubes
and into the
EN