Radio Operation; Dab Operation - Blaupunkt BPA 3022 M Bedienungsanleitung

OPERATION
EN
Bluetooth speaker signal transmit operation
Shortly press BT button to stop/transmit the signal to the Bluetooth speaker. It
shows BOX OFF/ON.
Note: Although Blaupunkt checks the compatibility of different Bluetooth speakers
with care, a flawless function with all models on the market cannot be guaranteed.
Zone 1 and Zone 2 operation
Shortly press Zone 1 (or ZONE 2) button to unable/enable Zone 1 (or ZONE 2)
volume.
Hold Zone 1 (or ZONE 2) button to mute Zone 1 (or ZONE 2) sound. Hold it
again to mute off.
Information or Clock priority
Shortly press DIS button to change the clock priority or information priority.
Note: In FM band, when received a RDS station shortly press DIS button to show
the STATION NAME/CLOCK/FREQUENCY.
Clock setting
In CLK HH/CLK MM item of the menu. Rotate VOL knob to set the hour/minute.
Head phone operation
There is a 3.5 mm head phone jack in the front panel. It is following the zone 1's
operation.

RADIO OPERATION

Receive a radio station
Press SRC/MENU button to select FM1->FM2->MW mode. Shortly press /
button to receive the desired radio station. Press and hold / button for
manual tuning the frequency.
Manually store station & recall preset station
Receiving a desired station. Press and hold one of the preset buttons (1 - 6) for 2
seconds. The current station is stored into the number button. Shortly press the
preset button (1 - 6) to directly listen the station that saved in the corresponding
preset button.

DAB OPERATION

Press SRC/MENU button switch to DAB1 or DAB2 source.
Selecting station
Press / button to select up/down station.