Inhaltsverzeichnis
Werbung
7
Removing
WARNING
Risk of injury caused by arm-rail snapping back. When under tension, the arm-rail can snap back and
injure your head.
▶ When disengaging the magnetic catch, hook a finger into the strap loop. This will prevent your grip from
slipping, which would allow the arm-rail to snap back.
1. Slowly pull the strap loop and the magnetic catch up
and disengage it from the hook of the arm support.
2. Draw the strap loop down, keeping the arm-support
strap taut.
3. Remove your arm from the arm support and hold it
in front of your body.
4. Slowly guide the arm support up.
5. Let the magnetic catch engage fully at the parked
position on the shoulder strap.
6. Check that the magnetic catch is correctly seated.
7. Repeat these steps with your left hand for the right arm support.
30
English
2339613
*2339613*
Werbung
Inhaltsverzeichnis
