Bullerjan B3 Keramik Montageanleitung Seite 17

21. Now fix the retaining strip to
the stove at the back of the
front tile. Use the screws
(M6 x 16) and one washer
each.
CAUTION: Tighten the screws
hand-tight only.
22. Carefully hook the front
plate with the threaded ends
protruding downwards from
the retaining strip into the
holes provided for this
purpose.
21. The front plate can be
adjusted in height by
screwing in and out the
threaded pins in the
holding strip so that the
end plate closes with the
side parts.
17