Kärcher WPD 200 Basic Originalbetriebsanleitung Seite 17

Operation
Operator and display elements
1 Button for unchilled water
2 Button for chilled water
3 Button for carbonated water (option) or dummy but-
ton
4 LEDs blue and red
5 Drip pan
6 Water dispenser
Note
The buttons are sensor buttons. They can be operated
with merely a light touch.
1 Button RESET
2 Service interface
Support leg (option)
1 Cup dispenser
2 Door base
3 Door lock
Water dispenser
 Place the receptacle in the middle of the drip pan.
 Press the button for the selected water type and
hold it down until the desired amount of water has
been dispensed into the receptacle.
Shutdown
If the appliance will not be needed for more than 4 days:
 Shut off water supply.
 Set the appliance switch to "0".
Startup after shutdown
WARNING
Health risk due to increased micro-organism concentra-
tion in the water.
If the device has not been used for a long time, the fol-
lowing tasks must be carried out:
 Set the appliance switch to "I".
 Open the water supply.
 Start chemical cleaning (see "Care and Mainte-
nance/Chemical cleaning").
Storage
CAUTION
Consider the weight of the appliance when storing it.
Prior to restarting after storage:
 Uninstall filters that are inserted in the device and
replace them with new filters.
 Start chemical cleaning (see "Care and Mainte-
nance/Chemical cleaning").
4
-
EN 17