Bosch 3 601 HB5 0 Serie Originalbetriebsanleitung Seite 20

20 | English
Application tool
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
ACZ 70 RD4
Starlock
70 mm diameter
Carbide-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
ACZ 85 RD4
Starlock
85 mm diameter
Diamond-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
AVZ 70 RT4
Starlock
70 mm wide
carbide-RIFF mor-
tar remover
AVZ 90 RT2
Starlock
90 mm wide
carbide-RIFF delta
plate for mortar
and abrasive ma-
terials
1 609 92A 819 | (01.07.2022)
Material Application
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
Insulation material, insula- Precise cutting of soft materials;
tion boards, floor panels, example: Cutting insulation boards to size, cutting pro-
impact sound insulation truding insulation material to length so that it is flush with
boards, cardboard, car- the surface
pets, rubber, leather
Fibre cement boards, tile Separation and plunge saw cuts; also for sawing close to
joints, brick, fibreglass-re- the edge in difficult-to-access areas; long service life
inforced plastics, lamin- thanks to BOSCH carbide technology;
ate Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
Thin tile joints, porous Cutting and separating with a particularly thin blade
concrete, soft brick, ce- (1.6 mm) in areas and corners that are close to the edge
ment fibreboards, fibre- or difficult to access, long service life thanks to Carbide-
glass-reinforced plastics, RIFF;
epoxy Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as a version for normal joints: ACZ 85 RT3
Cement joints, soft wall Cutting and separating in areas and corners that are close
tiles, fibreglass-reinforced to the edge or difficult to access, long service life thanks to
plastics, epoxy, GRP Diamond-RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles
Mortar, joints, epoxy Reaming and separating joint and tile material, as well as
resin, fibreglass-rein- rasping and sanding on a hard substrate; long service life
forced plastics, abrasive thanks to BOSCH carbide technology;
materials Example: Removing tile adhesive and grout
Mortar, concrete residue, Rasping and sanding on a hard substrate;
wood, abrasive materials, Example: Removing mortar or tile adhesive (e.g. when re-
paint placing damaged tiles), removing carpet adhesive
residues, removing paint residues;
available in grain sizes 20 (RT2), 40 (RT4), 60 (RT6) or
100 (RT10)
Bosch Power Tools