Operation; Switching The Device On/Off; Switching To Standby Mode; Language - AudioAffairs NRD 010 Bedienungsanleitung

Nostalgia Radio

10. OPERATION

10.1 SWITCHING THE DEVICE ON/OFF

• To switch the device on using the power switch, set the MAIN SWITCH on the
back side of the device to ON (I). Once switched on, the display will flash 00:00 as
the time. It usually only takes a few seconds for the time to set automatically and
show correctly in the display.
• To switch the device off using the power switch, set the MAIN SWITCH on the
back side of the device to OFF (O).
• In AUX or Bluetooth mode, the device will automatically switch to standby mode
after approx. 15 minutes if no signal is received.

10.2 SWITCHING TO STANDBY MODE

• You can switch the device in and out of standby mode by pressing the POWER
button. Power On will briefly appear on the display after switching the device on.
The operating mode selected before switching to standby will be selected auto-
matically.

10.3 LANGUAGE

You can select the display information to be shown in German or English.
1. Press and hold the MENU button until
- the display shows Alarmzeiten (alarm times) in FM and DAB Radio (DAB radio)
mode. Turn the PRESET dial until the Hauptmenü (main menu) is displayed and
then press button 38,
or until
- the Hauptmenü (main menu) is displayed in AUX and Bluetooth mode.
2. Turn the PRESET dial until the menu Sprache (language) is displayed.
3. Press the button 38 to select the menu.
4. Turn the PRESET dial to select a language.
5. Press the button 38 to save the new language.
CUSTOMER SERVICE
00800 - 45622000
Operation
www.gt-support.de
41