Setting The Alarm; Activating/Deactivating The Alarm - AudioAffairs NRD 010 Bedienungsanleitung

Nostalgia Radio

14. SETTING THE ALARM

You must set the time before you can set the alarm.
Two individual alarm times can be set.
NOTES:
• If an alarm is active, the display will show
• Make sure you save your changes to the alarm times.
1. Press and hold the MENU button until Alarmzeiten (alarm times) is displayed.
2. Press the button 38. The display will show Alarm1 (alarm1). You can switch to
Alarm 2 (alarm 2) by turning the PRESET dial.
3. Press the button 38 to select one of the two alarms.
4. Press the button 38 again to activate or deactivate the alarm.
5. Turn the PRESET dial until the menu Zeit (time) is displayed and open it by press-
ing button 38.
All settings are accessible by turning the PRESET dial and pressing button 38.
- Zeit (time): set the hour and time.
- Tage (days): adjust the wake-up mode settings. You can select between täglich
(daily), einmal (once), Werktag (weekdays) and Wochenenden (weekends).
NOTE: if you select the function einmal (once), the wake-up function will be
activated at the next set wake-up time.
- Modus (mode): you can choose between DAB, FM or a Buzzerton (buzzer signal)
for your wake-up call
- Lautstärke (volume): Setting the volume
- Speichern (save): new settings become active once they have been saved.
6. When you are finished, press the button 38 to save the new settings. The display
will briefly show Alarm gespeichert (Alarm saved). The display will then show Alarm
1/2 (Alarm 1/2) and the alarm time.
• You can turn off the alarm signal by pressing POWER.
To repeat the alarm after 9 minutes, press the button 38.
•

14.1 ACTIVATING/DEACTIVATING THE ALARM

1. Press and hold the MENU button until Alarmzeiten (alarm times) is displayed.
2. Press the button 38. The display will show Alarm1 (alarm1). You can switch to
Alarm 2 (alarm 2) by turning the PRESET dial.
3. Press the button 38 to select one of the two alarms.
4. Press the button 38 again to activate or deactivate the alarm. Ein (on) or Aus (off)
will appear on the display.
CUSTOMER SERVICE
00800 - 45622000
or 2 .
1
www.gt-support.de
Setting the alarm
49