Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Device description
1. On/off shift lever
2. Dedusting indicator light
3. Speed controller
4. Additional speed controller
5. On/Off-Taste
6. Power cable
7. Dedusting connection
8. Grinding disc
9. Plate key
Working with the device
Switching on and off the device, as well as the speed control
The device is designed for manual work and can be used in any position.
o
Before starting work, select a suitable abrasive depending on the material to be processed.
o
Place the selected material on the plate, then connect the device to the power supply and
press the On/Off button.
To start the device, press the power button.
o
Select the appropriate operating speed (the device speed can be set with the speed
o
adjustment buttons in the range of 4,000 to 10,000 rpm. With each push of a button, the
speed is increased or decreased by 1000 rpm.
After grinding, release the power lever and press the on/off button. WARNING: Place the
o
device on the surface you want to machine before you start grinding and move the device
away from the surface you want to machine before turning it on. This prevents the workpiece
from showing grooves.
Werbung
