Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
Safe working with the device is only possible if you read the operating instructions in full and strictly
follow the instructions contained therein.
The device plug must be compatible with the socket. Do not change the plug in any way.
o
Original plugs and suitable sockets reduce the risk of electric shock.
Avoid touching grounded components such as piping, radiators, stoves and refrigerators.
o
There is an increased risk of electric shock if your body is grounded by wet surfaces and in a
humid environment. Water entering the device increases the risk of damage and electric
shock
Do not touch the device with wet or damp hands.
o
Do not use the cable improperly. Never use it to carry the device or unplug it. Keep the cable
o
away from heat, oil, sharp edges, or moving parts. Damaged or welded cables increase the
risk of electric shock.
When working outdoors, use an outdoor extension cable. Using an extension cable for
o
outdoor use reduces the risk of electric shock.
If you cannot prevent the device from being used in a humid environment, use a residual
o
current circuit breaker (RCD). An RCD reduces the risk of electric shock.
It is forbidden to use the device if the power cord is damaged or shows obvious signs of use.
o
A damaged power cord should be replaced by a qualified electrician or by the manufacturer's
customer service.
Do not immerse the cable, plug or device in water or other liquids to avoid electric shock. Do
o
not use the device on wet surfaces.
Do not use the device in rooms with very high humidity or in the immediate vicinity of water
o
tanks!
Do not let the device get wet. Risk of electric shock.
o
Safety at work
Keep your workplace clean and well lit. Clutter or poor lighting can lead to accidents. Act with
o
foresight, watch what is being done, and use your common sense when using the device.
Do not use the device in potentially explosive atmospheres, for example in the presence of
o
flammable liquids, gases or dust. Devices may generate sparks that can ignite dust or fumes.
In the event of damage or malfunction, the device should be turned off immediately and
o
reported to an authorized person.
If you are not sure if the device is working properly, contact the manufacturer's service.
o
Repairs may only be carried out by the manufacturer's service. Do not carry out repairs on
o
your own!
To extinguish the device in case of fire or fire, use only powder fire extinguishers or carbon
o
dioxide extinguishers.
Keep children and unauthorized persons away; Carelessness can lead to loss of control of the
o
device
Use the device in a well-ventilated area.
o
During operation, the device produces dust and dirt. Protect uninvolved people from harmful
o
effects.
Keep the instructions for use for further use. If the device is passed on to third parties, the
o
instructions for use must also be handed over.
Keep packaging elements and small assembly parts out of the reach of children
o
Keep the device away from children and animals
o
Werbung
