Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inserting / replacing the batteries in the remote control
To replace the battery, please follow the steps below:
•
Using a small screwdriver, unscrew the screws and unscrew the cover on the bottom of the
remote control counterclockwise to open it. Take out the old battery.
•
Be careful not to bend the contacts. Insert the new battery.
•
Please make sure the polarity is correct (+/-) Use only CR2032 type and dispose of the old
batteries in an environmentally friendly way and according to the regulations in your country.
•
Put the cover on the bottom of the remote control and turn it clockwise to close it again and
screw the screw back in.
Display
Seite 26 von 32
Remote control
Werbung
Inhaltsverzeichnis
