Diving Mode - Chris Benz Depthmeter Digital Bedienungsanleitung

11. DIVING MODE

When in any other mode, the watch will enter the diving mode with the display changing to (Ready
state) by pressing button (M) for 2 seconds or longer. If (Ready display) put in this way is allowed to
stand for about 60minutes, the display automatically returns to the preceding mode.
One of the following three displays is shown in the diving mode:
Ready display
DIV mark fl ashes.
When button (M)
is pressed for 2
DIV
seconds or longer,
the watch returns
to the time/calen-
dar mode.
(M)
68
Depth measurement
While button
(A)
(A) is pressed,
DIV
1 2 . 5 m
the maximum
depth and
watertemperature
1 8 3 0
are indicated.
11. DIVING MODE
GENERAL
When a depth of 1 meter (4ft) is reached after you begin diving with the watch displaying (Ready
display), the display will automatically change to Depth measurement displays.
When the diving depth becomes less than 1 meter (4ft), the display will automatically change to
0m (ft) display after depth measurement. If the diver dives again deeper than 1 meter within 10
minutes, the dive time counting resumes.
If button (M) is pressed for 2 seconds or longer with the display of 0m (ft) display after depth
measurement, then the watch returns to the time/calendar mode.
0m (ft) display after depth measurement
While button
(A)
pressed, the maximum
DIV
0 . 0 m
depth and minimum
temperature reached
in this dive are indicated.
5 . 3 0
(M)
Time/Calendar Mode
(A) is
1 0:1 0
(M)
2 5 . FR
69