Setting The Time And Calendar - Chris Benz Depthmeter Digital Bedienungsanleitung

5. SETTING THE TIME AND CALENDAR

Digital display (I)
Hour, Minute
AM/PM
(B) (A)
1 0:1 0
2 5 . FR
(M)
Digital display (II)
Date, Day
or Second
50
DIGITAL SETTING
While in the time mode press button (B)
seconds or longer, seconds will fl ash and switch
to correcting state.
While second fl ashes, press button (A) to reset
the second to „00" then second starts again.
When in the seconds correcting sate (seconds
fl ashes), press button (B) the fl ashing digits will
change in the order of secound - minute - hour
- month - date - year - 12/24 hour system.
Select the digits to correct.
Correct the fl ashing digit by pressing button
(A). (Press and hold down button (A) to quick
advance the fl ashing digit).
5. SETTING THE TIME AND CALENDAR
ANALOG SETTING
for two Unscrew the crown and pull it out to stop the
second hand at „0" position.
Turn the crown and position the hour and
minute hands 1 minute in advance of the
digital time.
Press the crown into place when the seconds
display of digital time has just come to „0" to
start the second hand.
ATTENTION: Always perform the digital
setting fi rst, then the analog setting.
GENERAL
Press button (A), the 12 hour and 24 hour will
switch alternately.
If the watch is left any correcting state for 3
minutes or more without changing the digits,
the correcting mode is reset and the watch will
automatically return to normal time display
mode.
Pressing button (M) while in the time correcting
state, the watch will return to normal display
mode (manual return).
Due to the autocalendar, no correction at the
end of the month is required.
51