No Decompression Limits Chart; Specifi Cations / Display Shortcuts - Chris Benz Depthmeter Digital Bedienungsanleitung

16. NO DECOMPRESSION LIMITS CHART

(1)
ATTENTION: These values serve only
as guideline and do not replace diving
computers!
78
On the rubber strap of your CHRIS BENZ model
you can read the decompress-free areas accor-
ding to the „American Navy Diving Manual".
A no-decompression limit (NDL) is a time limit.
No-decompression limits vary from dive to dive.
A diver who stays underwater longer than the
no-decompression limit for his dive can not
ascend directly to the surface, but must break
periodically as he ascends to avoid a high risk of
decompression sickness. A diver should be never
exceed a no-decompression limit without specia-
lized training in decompression procedures.
EXAMPLE (1): Depth 27 meters = 30 minutes
without decompression
17. SPECIFICATIONS / DISPLAY SHORTCUTS
Battery life: approximately 2 years
Effective temperature area for use: -10°C to +40°C
Depth alarm: 1.0m to 80.0m (4ft - 260ft)
Accuracy of time measurement: +/- 20 seconds/month (at normal temperature +5°C to +35°C)
Accuracy of depth reading: +/- indicated value X 3 % + 30cm
Accuracy of temperature reading: +/- 3°C between -5°C and +14°C; +/- 2°C betw. 15°C a. +40°C
Water-resistance up to 20 bar (ca. 200 meter) by ISO2281
1. TIME/CALENDAR MODE: „SEL"=„Select" (View changing/Continue with buttons
2. ALARM MODE: „SEL"=„Select" (View changing/Continue with buttons
3. CHRONOGRAPH MODE: „STA"=„Start" (Start the stop watch)
4. LOG MODE: „SEL"=„Select" (View changing/Continue with buttons
„FIN"=„Finish" (End of dive), „MAX"=„Maximum Depth", „AV"="Average Depth",
„MIN"=„Minimum water temperature", „CA"="Change Log" (Jump to the next log data)
5. DIVE ALARM MODE: „SEL"=„Select", (View changing/Continue with buttons
(A) and (B))
(A) and (B))
(A) and (B)),
(A) and (B))
79