Diving Mode - Chris Benz Chronograph 300M Bedienungsanleitung

8. DIVING MODE

(B)
42
From the time mode, or the chronograph mode,
switch to the diving mode by pressing button
continuously for 2 seconds.
ABOUT DEPTH READINGS
After switching to the diving mode, depth
readings will commence automatically when
diving begins.
The depth will be measured and displayed
in 1 meter increments up to 50 meters.
Measurement interval: Once/Second.
8. DIVING MODE
READING THE DEPTH
(B)
While diving, the number indicated by the depth indicator hand (the function hand) is the
present diving depth. The depth indicator hand begins to function at a depth of 1 meter.
It registers depths less than 1 meter as 0. At depths over 50 meters, the hand stops on the
Over Zone Marc (53 minutes) and remains there until returning to depths less than 50 meters.
43