AVENLI FP13-21-CZ Benutzerhandbuch Seite 9

P11
THE ILLUSTRATION DOES NOT CORRESPOND TO THE SCALE
Instructions for use
1. Check that the pool is already filled with water and place the filter pump in a
suitable location.
2. When water flows into the filter pump, its pressure pushes the sucked air through
the air vent valve (P1).
3. Then carefully tighten the vent valve (P1) clockwise.
4. Connect the power cord of the adapter to a 230 V AC mains socket and leave the
filter pump running until the water has cleared.
P11
WATER
HUNGER
P13
P14
P14
P13
INSIDE THE POOL
9