WARNING: This pump must be powered by a current protector with a rated residual
operating current not exceeding 30 mA.
WARNING: Maximum total immersion of 0.9 m (for pumps with a power input
exceeding 50 W)
WARNING: The pump must be installed at least 2 m from the pool and the plug must be
located 3.5 m from the pool. (French market only)
WARNING: The pump must be secured to the ground or base with two Φ5 bolts or
screws to prevent accidental dropping (see following figure).
P12
P10
P11
6
P1
P2
P3
P4
P5
P6
P7
P9