Installation Instructions - AVENLI FP13-21-CZ Benutzerhandbuch

Item no.
P1
P2
P3
P4
P5
P6
P7
P9
P10
P11
P12
P13
P14

Installation instructions

1. Before installing the filter pump, first build the pool and fill it with water according to
the detailed pool installation instructions. Start the filter pump only after the pool
water has reached its maximum level. Low water pressure in the pump can cause
noisy motor operation.
2. Remove the filter pump and hoses from the packaging.
3. Place the filter pump at least 0.2 m and no more than 1.0 m below the pool
water level.
4. Note: This filter pump must be mounted on a solid and level surface. There are
mounting holes at the bottom of the pump for attaching the pump with screws.
Description
Vent cover
Vent cover gasket
Filter chamber cover nut
Filter chamber cover
Rubber seal of the filter chamber
Filter cartridges
Filtration chamber
Power cable
O-ring
Hose clamp
Connecting hose
Filter sieve
Connector
7
Quantity
1
1
1
1
1
1
1
1
2
4
2
2
2