Installation Illustration - AVENLI FP13-21-CZ Benutzerhandbuch

5. Insert the filter cartridge (P6) into the filter chamber (P7) so that the filter cartridge
(P6) is inside the filter chamber (P7).
6. Fit the filter housing O-ring (P5) onto the filter chamber (P7).
7. Fit the filter housing cover (P3) onto the filter chamber (P7).
8. Then hand tighten the filter chamber cover nut (P3) clockwise.
9. Connect one filter hose (P12) to the inlet port of the filter pump (above) and to the
bottom connection of the pool hose. Secure the hose with hose clamps (P11).
10. Carefully turn the vent valve (P1) 1-2 turns counterclockwise.
11. Connect the second filter hose (P12) to the upper pool hose connection and to the
outlet port (bottom) of the filter pump (see page 7). Secure the hose with hose
clamps.
12. The sound pressure level is less than 82 dB (A).

Installation illustration

EXIT
P11
P11
ENTER
P12
P9
8
P12