AVENLI FP13-21-CZ Benutzerhandbuch Seite 12

THE MOTOR IS RUNNING BUT THE PUMP IS NOT PUMPING WATER OR THE FLOW IS
TOO SLOW:
A. Check that the suction or drain hose in the pool wall is not blocked.
B. Tighten the hose clamps, check for damaged hoses, check the water level in the pool.
C. Clean the filter cartridge more often. The filter cartridge can be easily cleaned, for
example with a garden hose.
D. Replace the filter cartridge.
E. Consult an expert.
THE PUMP IS LEAKING WATER
A. When the pump is switched off, check that the pool water level is at least 5 cm above
the lower edge of the skimmer mouth.
B. Check that no water is leaking from the suction hose.
C. Check that the filter cartridge is not dirty and that it does not need to be cleaned. The
filter cartridge can be easily cleaned, for example with a garden hose.
D. Consult an expert. The filter pump is not cleaning the pool A) Adjust the chlorine
content and pH level. B) Clean or replace the filter cartridge. The filter cartridge can
be easily cleaned, for example with a garden hose. C) Check the cartridge for leaks.
Replace a damaged cartridge. D) Leave the pump running longer.
E. Remove debris from the screen in the pool wall.
F. Consult an expert.
12