Use Of The Microscope; Turning On The Camera; Turning On The Monitor; Turning On The Microscope - Optika Italy B-510-Serie Bedienungsanleitung

10. Use of the microscope

10.1 Turning on the camera

The LED indicator ① (Fig. 13), when the power supply is
•
connected but the camera is switched off, is red.
1. When the ON/OFF button is pressed, the LED ② starts flash-
ing blue for a few seconds.
2. Once the switching sequence is complete, the LED ② is
steady blue.
3. The camera is ready to work.

10.2 Turning on the monitor

1. Press the POWER button
monitor (Fig. 14) to turn on the monitor.
• The monitor takes a few seconds to become operational.

10.3 Turning on the microscope

1. Operate on the light intensity adjustment knob
ON/OFF the microscope and to increase/decrease the
illumination voltage. (Fig. 15)
placed on the left side of the
③
④
③
to turn
Page 13
②
①
F ig. 13 F ig. 13
F ig. 14 F ig. 14
④
F ig. 15 F ig. 15