Carromco 78155 Montageanleitung Seite 2

78155, 78156 – Scooter XT-200
PARTS IDENTIFIER
ASSEMBLING YOUR SCOOTER ASSEMBLING YOUR SCOOTER
IMPORTANT: Remove the scooter from the carton, read
assembling your scooter. The instructions are in a step-by-step sequence. Save all packaging and material assembling your scooter. The instructions are in a
until assembly has been completed.
FOLDING MECHANISM
The front wheel and handlebar assembly is hinged at the front of the deck. To open the scooter into its riding The front wheel and handlebar assembly is hinged at the front of the
position, simply press the red button and simply press the red button and lift the handlebar column up. When the handlebars and front wheel
assembly are in the correct riding position, the folding mechanism will snap and lock. assembly are in the correct riding position,
press the button again and move the column downwards, until the locking mechanism snaps. press the button again and move the column downwards, until the locking mecha
he scooter from the carton, read the assembly instructions in this manual before
the folding mechanism will snap and lock. To fold the scooter flat,
1 HANDLEBAR GRIP
2 HANDLEBAR COLUMN
3 QUICK RELEASE CLAMP QUICK RELEASE CLAMP
4 FOLDING MECHANISM
5 DECK
6 FRONT WHEEL
7 FOOT BRAKE
8 REAR WHEEL
9 KICKSTAND
the assembly instructions in this manual before
sequence. Save all packaging and material
. When the handlebars and front wheel
. To open the scooter into its riding
nism snaps.
ENGLISH
2
1
1
1
1
1
1
1
1