Device Functions - Navitel MR255 NV Benutzerhandbuch

26 | USER MANUAL

Device functions

Format SD-card
Record
EN
Capture
Video
Protect file
Loop recording
Record audio
Rear camera mode
G-sensor
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically. Press the OK button to stop
recording. Press OK again to record another video. Each video will be saved automatically.
In STBY mode, press and hold for 3 seconds Menu button to enter Capture mode, press the OK button to take a photo
(it will be saved automatically).
In Capture mode, press and hold the Menu button for 3 seconds to enter Playback mode. Select the file using the
Up and Down buttons, then press OK to play/stop the file. You can switch between files from the front/rear camera
by holding down the OK button for 3 seconds. The letter in the file name indicates the camera: F - front, R - rear.
In Video Recording mode, press Menu to protect the current recording. A key symbol will appear at the bottom of the
screen. Protected files cannot be deleted or overwritten.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
space, the unprotected files will be overwritten in the order in which they were created.
Record video with or without sound.
When supplying +12 V to the red wire, the rear camera mode is activated. DVR starts displaying only the view from
the rear camera with the parking lines on it.
Note: recommendations on how to connect this wire is given on the "Rear Camera" page of this manual.
If the vehicle is hit by something, the DVR will automatically lock the current video.