Remote Controller; Device Functions - Navitel M800 DUAL Bedienungsanleitung

22 | USER MANUAL

Remote controller

Button
EN
LED indicator

Device functions

Format SD-card
Record
Loop recording
Record audio
Lock file
G-sensor
In Video Recording mode, short press to lock the file (the protected file cannot be deleted or overwritten).
Long press to turn Wi-Fi on/off.
No indication - the device is switched off.
The indicator lights up red continuously - the device is turned on, the recording is stopped.
The indicator flashes red - the device is turned on and recording is in progress.
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
When connected to a power source, the device will turn on and start recording automatically (with a red indicator
flashing). The video is automatically saved.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
space, the unprotected files will be overwritten in the order in which they were created.
The device is equipped with a special chip that allows you to record audio with the suppression of wind and street
noise, engine operation, etc.
In Video Recording mode, short press the button on the remote control to protect the current recording. Protected
files cannot be deleted or overwritten.
If the vehicle is hit by something, the DVR will automatically lock the current video. Protected files cannot be deleted
or overwritten.
Function