Device Functions - Navitel R300 GPS Bedienungsanleitung

Device functions

Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
Format SD-card card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically (indicated by the flashing
Record blue light). Press the OK button to stop recording. Press OK again to record another video. Each video will be saved
automatically.
In Record mode (STBY), press the Mode button to enter Capture mode, press the OK button to take a photo (it will
Capture
be saved automatically).
In Record mode (STBY), press the Mode button twice to enter Playback mode; press the Up and Down buttons to
Playback select a file; press the OK button to play a file. During playback, press OK to pause/unpause; press the Up and Down
buttons to fast forward / rewind.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
Loop recording
space, the unprotected files will be overwritten in the order in which they were created.
Recording parameters: 100 ms - recording at 10 frames per second (fps), 200 ms - 5 fps recording, 500 ms - 2 fps recording.
Interval record
Only fast playback of a recording is available (30 fps). Normal playback is not possible.
When an object is moving the device will automatically start recording. If the object does not move for more than
Motion detection
20 seconds, recording stops.
Record audio Record video with or without sound.
NAVITEL R300 GPS | 23
EN