Device Functions - Navitel MR450 GPS Benutzerhandbuch

Device functions

Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
Format SD-card card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically. Press the Record button
Record
to stop recording. Press the Record button again to record another video. Each video will be saved automatically.
Capture Press the Capture button to take a photo (it will be saved automatically).
Press Menu –> Playback –> Video File –> Back to enter Video mode. Select a file to play. In Video mode, press
Video
to pause / unpause; press
Press Menu –> Playback –> Image File –> Back to enter Photo mode. Select a file to view. In Photo mode, press
Photo
to select the previous / next file.
In Record mode (REC), press Protect file to protect / unprotect the current recording. In Playback mode select Protect,
Protect file then Protect / Unprotect All. In Video / Photo mode select a file, then select Protect / Unprotect Current. Protected
files cannot be deleted or overwritten.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
Loop recording
space, the unprotected files will be overwritten in the order in which they were created.
Nigth mode Mode for record in low light.
Movie Off Time The device turn off automatically after power cutoff. Time interval can be set in the Menu.
Record audio Record video with or without sound.
Recording parameters: X fps - recording at X frames per second. Only fast playback of a recording is available (30 fps).
Time lapse
Normal playback is not possible.
◄ / ►
to select the previous / next file.
▌ ▌
NAVITEL MR450 GPS | 29
EN
/ ►
▌▌
◄ / ►
▌ ▌