Herunterladen Inhalt Inhalt Diese Seite drucken

Other Functions - Krups PERFECTMIX COOK Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

MANUAL FUNCTIONS:
Pulse: Press the pulse button to let the appliance run for only a few seconds at
a time. To stop it, release the button. Press the pulse button as often as it is
necessary.
The longest working time can not be more than 3 minutes.
Blend: select blend program on screen then choose the speed setting with +
and – buttons, validate with Start/Stop button.
Then choose timer, default time 2 min and adjut with + and – buttons, validate
with Start/Stop button the programm will start immediatly. At the end of the program,
the appliance bips 5 times.
Heat : allows to freely control the way you want to heat. Press the heat button,
the screen indicates « 75° » but you can choose the heating temperature from
40° up to 100° by selecting + and – buttons. Then press Start/Stop button.
You can set up the working time by selecting + and - buttons between 5 minutes and 90
minutes, the screen indicate default time : 10 minutes. Then, press Start/Stop button.
The remaining time appears on the screen. Wait for the blender to stop automatically.
The appliance beeps 5 times. You can also stop the blending during the cycle :
- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds.

OTHER FUNCTIONS

Start/Stop : allows to stop any blending or heating program before the end by
pressing this button.You can also stop the blending during the cycle :
- within 1 minute of working, press the
start/stop button
- more than 1 minute of working, press
and hold the start/stop button for 3 seconds
If the appliance switches off during operation, proceed as follows :
- Unplug and leave it to cool down for approximately 15-20 minutes.
- Reconnect the appliance to the power
supply and resume blending.
- The appliance will keep the program in memory for 3min if stopped.
• Clean the jug immediately after use.
• For easy cleaning, you can use. Deep clean: Put 800ml of water in the jug. Select the
cleaning program on the screen and press Start/Stop button Wait for the end of program.
Finish cleaning the jug with the help of a sponge.
• Rinse the inside of the jug and the lid under running water.
• Rinse the inside of the jug and the lid under running water.
• In the event of the heated part of the jug getting extremely dirty, fill in the jar with a mix
of water and washing up liquid and let it soaked for a few hours to help get it clean.
4
CLEANING
• Use a damp cloth to clean the motor Unit. Dry it carefully.
• You can use the brush to clean the blade holder. Be careful, the blades are very
sharpened.
Caution:
• Empty the preparation, the jug is not meant for storing food in the refrigerator or
freezer.
• To clean the outside of the motor unit and the walls of the jug, use a damp cloth.
• Do not immerse the appliance in water (neither the motor unit nor the blade holder).
Never put the motor unit (D) under running water.
• Refer to the cleaning table to check how to clean each part.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Causes
The plug is not connected.
The blender jug is not positioned
correctly on the motor unit or the
jug and lid are correctly in place
Appliance does not
and are not locked onto the motor
work
unit.
Appliance, keypboard or program
not responding
In case of overheating
The appliance
Overload or overheating
stopped while in use
The product is not placed on a flat
surface.
Excessive vibrations
Volume of ingredients is too high.
Solutions
Connect the appliance to a socket
with the same voltage as indicated
on the rating plate of the appliance.
Check that the blender jug and
the lid are positioned properly on
the motor unit as explained in the
instructions.
Unplug the appliance, wait for 1
minute and plug in again.
Unplug and leave it to cool down
for approx.15-20 minutes.
Unplug and leave it to cool down
for approx.15-20 minutes.
Reconnect the appliance to
the power supply and resume
blending.
Place the appliance on a flat
surface.
Reduce the quantity of ingredients
processed.
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis