General Power Tool Safety Warnings; Sander Safety Warnings; Functional Description - Makita BO5040 Betriebsanleitung

ENGLISH
(Original instructions)
1 Lock button
2 Switch trigger
3 Speed adjusting dial
4 Orbits per minute
5 Dial setting
6 Screw
7 Front grip
8 Grip base
SPECIFICATIONS
Model
Paper size....................................................... 125 mm
–1
Orbits per minute (min
Dimensions (L x W x H) ................................. 218 mm x 123 mm x 153 mm
Net weight ...................................................... 1.4 kg
Safety class ....................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
5. Ventilate your work area adequately when you
perform sanding operations.
6. Some material contains chemicals which may be
toxic. Take caution to prevent working dust inha-
lation and skin contact. Follow material supplier
safety data.
Explanation of general view
9 Makita logo
10 Dust bag
11 Dust nozzle
12 Groove
13 Front fixing cardboard
14 Front side of paper dust bag
15 Claws
16 Upper part
BO5040
)................................ 12,000
/II
7. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
ENE052-1
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
ENF002-1
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
GEA010-1
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
• Switch can be locked in "ON" position for ease of oper-
ator comfort during extended use. Apply caution when
GEB021-4
locking tool in "ON" position and maintain firm grasp on
tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button and then release the switch trig-
ger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
17 Notch
18 Guide
19 Holding tab
20 Dust box
21 Latch
22 Sponge pad
23 Felt pad
24 Wool bonnet
BO5041
125 mm
4,000 – 12,000
218 mm x 123 mm x 153 mm
1.4 kg
/II
5