Resetting The Scale To Zero; Using The Tare Function (Tare); Hold Function - ADE Franca Bedienungsanleitung

Operation
5. Repeatedly press Hold/Unit to select the desired unit of measurement.
The options are "g" (gramme), "lboz" (pound), "ml" (millilitre) and "fl.oz. " (fluid ounce).
Pay attention to the indication on the display.
Choose "ml" or "fl.oz" when you want to weigh liquids.
6. Place the item to be weighed in the measuring cup.
7. Read the measured weight.
You can also use the measuring cup by using the scales for quantity
measurement. In this case, there is no need to turn on the scale.

Resetting the scale to zero

If the display still shows values even though the measuring cup is empty (for example,
if the scale is not optimally positioned or a TARE value is still displayed; see next
section), you must reset the scale to zero.
− Briefly press ON/OFF/TARA.

Using the tare function (TARE)

This function is practical when baking, for example, if you would like to add another
ingredient to the ingredients already on the scale.
1. Briefly press ON/OFF/TARA to reset the scale to "0".
2. Add the new item or substance. The weight of the added item or substance is
shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process
can be repeated as often as needed until the capacity limit (3 kg) is reached.

Hold function

If the hold function is enabled, the display will still show the weight even if the item to
be weighed has been removed.
1. Perform the weighing, as described in "Weighing".
2. Briefly press the Hold/Unit button.
The display shows "H", the hold function is enabled.
If you now remove the item to be weighed or the measuring cup, the the display
will continue to show the measured weight.
3. To turn off the hold function, briefly press Hold/Unit again and the "H" symbol will
disappear.
18
KE 919 kitchen scale