Set The Scale To Zero; Using The Tare Function (Tara); Switching Off The Scales; Resetting The Scales - ADE Angelina Bedienungsanleitung

Resetting the scales

4. Use the Kg/Lb button to select the desired unit of measure. "g" (for Kg = kilogramme) or
"oz" (for Lb = English pound). Note the display.
5. Put the substance to be weighed into the weighing bowl.
6. Read the measured weight.
‚ The weighing bowl holds approx. 3 litres.
‚ You can also weigh using a different container (tub, plate, etc.). The
procedure is identical.

Set the scale to zero

If the display still shows values even if the weighing surface is empty (e.g. if the scales
are not optimally positioned or a TARE value is still displayed, see next section), you
must set the scales to zero.
− Briefly press TARE 1x.

Using the tare function (TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press TARE in order to set the scales back to "0".
2. Add the new substance. The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scales

− Press the ON/OFF button.
The scales automatically switch off if they are not used for approx. 90 seconds.
Resetting the scales
Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Reinsert the battery. Pay attention to the correct polarity of the batteries (+/-).
After switching the scales on, you can start weighing as usual.
18
Kitchen scales KE 707