Soundstream LW2.240 Bedienungsanleitung Seite 4

OWNER'S MANUAL
SPECIFICATIONS
Frequency response
Signal to noise ratio
Input Voltage Range
High Pass Filter
Low Pass Filter
Low Pass Filter @ CH 5 (only LW5.830)
Phase Shift @ CH 5 (only LW5.830)
High Impedance RCA/Line
Level Input Impedance
A High/Low Selector switch is also provided for the Bandpass-Mode (BP), allowing
you to choose either the low range (LOW 50 Hz - 650 Hz) or the high range
(HIGH 500 Hz - 6.5 kHz).
LW2.240
Output Power:
4 ohms
2 ohms
4 ohms bridged
Recommended fuse size
Dimensions W x H x L
LW4.480
Output Power:
4 ohms
2 ohms
4 ohms bridged
Recommended fuse size
Dimensions W x H x L
LW5.830
Output Power:
4 ohms
2 ohms
4 ohms bridged
Recommended fuse size
Dimensions W x H x L mm
±1dB 10Hz – 30kHz
>92dB
11 - 16 Volts DC
50 Hz - 650 Hz
50 Hz - 650 Hz
50 Hz - 250 Hz
0 – 180°
47 kOhms
2 x 60 watts
2 x 120 watts
1 x 240 watts
1 x 30A
200 x 55 x 200/240 mm
4 x 60 watts
4 x 120 watts
1 x 480 watts
2 x 30A
200 x 55 x 300/340 mm
4 x 70 + 1 x 180 watts
4 x 120 + 1 x 360 watts
1 x 480 watts
3 x 30A
200 x 55 x 450/490 mm
4
ENGLISH