Trouble Shooting - Soundstream LW2.240 Bedienungsanleitung

OWNER'S MANUAL

TROUBLE SHOOTING

SYMPTOMS CHECK
NO SOUND Is the power
LED illuminated?
(NO)
Is the Diagnostic
LED illuminated? (YES)
AMP NOT No power to power wire
SWITCHING ON
No power to remote
wire with receiver on
Burnt or broken fuse
NO SOUND Check Speaker Leads
IN ONE CHANNEL
Check Audio Leads
AMP TURNING Check Speaker load
OFF impedance
PROTECTION Shut down
LAMP ON
Speaker wires shorted
REMEDY
Check all fuses to amplifier.
Be sure Turn-on lead is connected
check signal leads.
Check gain control.
Check Tuner/Deck volume level.
Clean contacts on fuse holders.
Check for speaker short or
amplifier overheating.
Repair power wire or connections.
Check connections to radio.
Replace fuse
Inspect for short circuit or an
open connection.
Reverse Left and Right RCA inputs
to determine if the problem is
occurring before the amp.
Be sure proper speaker load
impedance recommendations
are observed.
Turn radio down
wait for Amp to cool down
Separate speaker wires and insulate
12
ENGLISH