LG RESU10H Prime Installationsanleitung Seite 26

1
3
Search and access the SSID of the RMD AP from a device (hereinafter referred to as a device)
supporting WLAN station functions such as a smartphone.
RMD SSID has a structure of "RESU_+ RMD WLAN STM MAC ADDRESS". For the
devices below, the SSID of the RMD SoftAP is "RESU_RESU_44CBXXXC14F".
The password is 44CBXXXC14F1234('44CBXXXC14F' is RMD MAC ADDRESS, so it
You can now access the RMD web page through an Internet browser. (The web browser will be
re-directed to RMD web address 192.168.4.1)
2
4
Enter the ID/Password and click 'Join' to go to the home screen.
ID: installer / *Password: ####1234
* '####' means the last four digits of mac address (ex. MAC address=44CBXXXC14F, ####
= C14F)
If you are logged in with installer account, the RMD web server displays the Installer
application page as the default. At the center of the web page, four selectable tabs are
displayed. And at the bottom (or top) of the web page, 'Home' tap is displayed. If you click the
'Home' tab, you can immediately go to this page(the installer application page).
Click the 'Installation' tab to proceed with the installation.
Through the installation tab, you can step through the battery installation procedure.
Pressing the 'Next' button in each step moves to the next step, and pressing the 'Complete'
button moves to the 'General Home tab' screen at the end of the installation process.
BMS Type: Select the battery pack type.
Number of battery modules: Select the number of battery modules
BCU serial number: Manually input the BCU serial number.
Battery module serial number: Manually input the battery module serial number.
Click the 'Save' & 'Next' button
(If the serial number structure is not correct, you cannot proceed to the next step).
26