LG RESU10H Prime Installationsanleitung Seite 16

3.2.2.3 User Agreement
1. Search the product which you will install.
2. Get the agreement of privacy policy for the customer.
3. If the customer agrees the privacy policy, have customer's personal information.
1
2
For the RMD's Wi-Fi direct connection, see below.
Search and access the SSID of the RMD AP from a device capable of supporting WLAN
Station functions (ex. smartphone).
RMD SSID has a structure of "RESU_+ RMD WLAN STM MAC ADDRESS". For the
devices below, the SSID of the RMD SoftAP is "RESU_RESU_44CBXXXC14F".
The password is 44CBXXXC14F1234('44CBXXXC14F' is RMD MAC ADDRESS, so it
When Wi-Fi connection is complete, click the "Next" button.
3.2.2.5 QR Code Scan
The QR code scanning method is as follows.
1
When the QR code registration is complete, click the "Next" button.
If the scanned serial number matches the actual serial number, it will proceed to the next
section.
There are three (3) QR codes: Battery Control Unit, Battery Module A, and Battery Module B.
3
Wall
Wall
3.2.2.6 External Internet Connection
3.2.2.6.1 Ethernet Connection (primary)
Connect the ethernet cable to a router with internet access.
* For the ethernet cable connector location, refer to the image below.
For ethernet use, it is enough to connect the cable. Since you have already connected the cables
Select
Prime: Fixed at 2
FLEX: Select from 2 to 4
S/N of consecutive QR
codes are automatically
displayed(Maximun 5)
1. Battery Control Unit QR Code
EH153064P8S8XXX
2. Battery Module QR Code
SH077064P8S8XXX SH077064P8S8XXX
Wall
Wall
"Next" button.)
Connector for
Ethernet cable
16