Technical Data - Sygonix 2609266 Bedienungsanleitung

8 Operation in the app
Tapping on the device on the app's main
page opens the page with advanced features
and settings.
Tapping the green on/off button switches the
bulb on or off.
You can delete the LED bulb from the app by
tapping on the device on the main page until
the delete button appears on the display be-
low. Then tap the button and confirm.
The current status is always displayed on
the LED bulb page. If only a LED bulb is
displayed in the middle, it is switched off via
the app. When the display is as shown in the
screenshot, the bulb is on.
Tapping the bottom centre button with the on/
off symbol turns the LED bulb on or off. The
last setting is saved.
You can adjust the colour temperature in the
open circle. Tap the desired position or swipe
the small white circle to the desired position.
The current colour temperature always ap-
pears in the centre.
Use the slider below to adjust the brightness.
The current brightness also appears in the
circle above.
You can switch between the current view and
the scene view at the very top. You can select
various preset scenes.
Tapping the left button at the very bottom
activates the timer. Simply set any time you
need and confirm it. The timer can turn the
LED bulb on and off. It depends on whether the LED bulb is switched off or on when the
timer is activated.
Use the bottom right button to set up a lighting schedule, a timer, etc.
Tapping the pencil icon at the top right opens the current device's settings.
Here you can update the firmware or, for example, connect the device to Alexa or Google
Assistant.
9 Cleaning and care
Important:
– Ensure the product has cooled down before cleaning it.
– Switch off the light switch on the bulb.
– Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the housing or even impair the functioning of the product.
– Do not immerse the product in water.
Use a dry, lint-free cloth to clean the product.
10 Disposal
10.1 Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
11 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to Directive 2014/53/EU.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of
conformity in the available languages.

12 Technical data

12.1 Power supply
Input voltage ................................. 220 – 240 V/AC, 50 Hz
Power consumption ...................... max. 9 W
Standby power consumption ........ max. 0.5 W
Current consumption .................... max. 50 mA
12.2 LED bulb
This product contains a light source of energy efficiency class F.
Base ............................................. E27
Output power ................................ 9 W
Luminous flux ............................... 806 lm
Colour temperature ....................... 2700 K – 6500 K
Energy efficiency .......................... 89.56 lm/W
Lifespan ........................................ Approx. 15,000 hours
12.3 Wi-Fi module
Wi-Fi ............................................. IEEE802.11b/g/n, 2.4 GHz
Frequency ..................................... 2.412 – 2.472 GHz
Transmission power...................... < 16 dBm
Wi-Fi range ................................... max. 70 m (in open space)
12.4 Bluetooth module
®
Standard ....................................... Bluetooth low energy technology v5.1
Frequency ..................................... 2.400 – 2.4835 GHz
Transmission power...................... < 6 dBm
Wi-Fi range ................................... max. 50 m (in open space)
12.5 Other
Supported operating systems ....... Android
Dimensions (Ø x H) ...................... approx. 60 x 108 mm
Weight .......................................... approx. 39 g
12.6 Ambient conditions
Operating conditions ..................... -10 to +40 °C, 20 – 80 % RH (non-condensing)
Storage conditions ........................ -40 to +70 °C, 20 – 80% RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in elec-
tronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
6.0 or later; Apple iOS 10.0 or later
TM
*2609266_V1_0822_02_m_RR_VTP_EN