Software Operation - Foscam NVR Kit Benutzerhandbuch

Please make sure the voltage of power supply is matched with wireless NVR, and ground
connection work well in socket. Connect the NVR and cameras as shown in the gures
above. Once the NVR is plugged in, press the power switch located on the rear panel.
After the NVR starts up successfully, the Power LED indicators will turn green, it means
system runs smoothly.

Software Operation

Log In
1. Turn on the power switch on the rear panel. After the NVR starts up successfully, the
power LED and HDD LED indicators will turn green. The startup page is displayed on the
screen.
2. Change password. For your security, please set a new password for your NVR before
Log In.
7