Security Tips
Do not install the wireless NVR in humid and dusty environment.
•
Put the wireless NVR in drafty environment in case of ventilation port being
•
blocked.
Check the power supply to avoid damage because of voltage mismatch.
•
Make sure the wireless NVR working within suitable temperature and humidity
•
environment.
Please install the wireless NVR horizontally, and avoid vibration.
•
Short circuit may occur when dust become wet on circuit board. Please clean the
•
dust on circuit board, connectors, and NVR case.
Explosion may happen because of improper replacement of battery, do not
•
replace it by yourself; If you need, make sure it is the same type of battery. And
do not open or repair it.
Please use suitable and professional hard disk to ensure continues and stable
•
recording.
Lightning protection is needed when device is connected to communication
•
cables. Ethernet cable which comes from outside, connecting to the wireless NVR
directly is forbidden.
NVR Kit Contents
4 x 1080P Bullet IP Cameras
4 x Power Adapters for Cameras
Quick Setup Guide
USB Mouse
1.5m (5 ft) Ethernet Cable
1 x Power Adapter for NVR
Warranty Card
Mounting Screws
8-Channel NVR
3