Foscam NVR Kit Benutzerhandbuch Seite 18

Upgrade
1. You can upgrade your NVR and cameras system with local Software.
NVR Upgrade:
Download the rmware to the U disk → Insert U disk to NVR USB port → Right-click→
Main Menu → Upgrade → click Refresh → click Upgrade to upgrade your NVR.
Note: Don't shut down the power during upgrade. After upgrading, NVR restarts.
IPC Upgrade:
Download the rmware to the U disk → Insert U disk to NVR USB port → Right-click→
Main Menu → IPC Config → Maintenance → click Refresh → click CH to update this
camera or click Select All to upgrade your all cameras.
1. Click the button to select the
firmware to the U disk
2 Click the button to
.
Upgrade
18