Foscam NVR Kit Benutzerhandbuch Seite 10

or Right-click→ Main Menu → Configuration → uncheck the Setup Wizard checkbox.
Click the Finish button to complete the setup wizard.
Uncheck the checkbox
The live view interface will show you the video feed of each IP Camera.
NVR adds IP Camera method
Note: The NVR and IP Camera are already paired. If you need to match more cameras
(Only FI9910W), please refer to the following steps.
1. Right-click on main interface, select Pair IP Camera.
2. Click Pair and press the pairing button of the camera tail cable at the same time, until
it prompts that the pairing is successful.
3. When finished code matching, The live view interface will show you the video feed of
each IP Camera.
10