Ⅲ. Structure; Ⅳ. Functions And Controls; Ⅴ. For Safety Operation - HBM Machines 10973 13 PK-38KN Bedienungsanleitung

Ⅲ. STRUCTURE
The upper part is made up of Power Source, Handle ,Belt Cover and Guard Hook which are fixed by
Engine base. The Engine base is fixed on Vibrating Plate by Shock Absorbing Rubber.The lower part is
made up of Vibrating Plate and Vibrator unit that has an Eccentric rotary shaft built in. The power source is
transmitted from the centrifugal clutch on engine output shaft to the eccentric rotary shaft via V-belt.
Power Transfer
Air-cooled single cylinder engine is amounted as power source and Centrifugal Clutch is fixed on
engine output shaft. Petrol Engine(2 cycle, 4 cycle) and Diesel Gasoline Engine can be mounted as option.
Centrifugal Clutch engages by running up the engine and engine is
compacting. The rotation of engine is transmitted from V-pulley integrated with Clutch drum to Vibrator
pulley through V-belt. Vibrator Pulley rotates Eccentric rotor shaft that is contained in Vibrator case. The
generated vibration created from eccentric rotor is transmitted to Compaction with the weight of the
machine makes the compaction of the ground possible.
Ⅳ. FUNCTIONS AND CONTROLS
Motor:
The motor is controlled by an ON/OFF switch or push button which is mounted on the motor below the
fuel tank.
The motor speed is controlled by a remote throttle lever which is mounted on the machine handle.
Honda and Kama motors are fitted with an oil alert device which will stop the motor or prevent starting
when the crankcase oil level falls below a safe level
Drive belt:
Tension of the drive belt is adjustable. Loosen the four nuts on the bolts which secure the motor to the
base plate, Adjust the set screws which bear against the motor crankcase to achieve the required belt
tension .Ensure that the four nuts and the set screw lock nuts are tightened after adjustment.
Ⅴ. FOR SAFETY OPERATION
This safety alert symbol identifies important safety messages throughout this manual and on the
machine. When you see this symbol, carefully read the message that follows. Your safety is at stake!
Foreword:
It is important to read this manual carefully so that you will fully understand the operational
characteristics and performance of the plate compactor, Proper maintenance procedures will insure long life
and top performance of the unit.
- 3 -
reduced o suitable number for