MALTEC SteamExpert HDS4500W Bedienungsanleitung Seite 32

GARMENT STEAMER
Make sure that the STEAM MOP is unplugged.
1) Fill the Water Tank with water. Please refer to the "HOW TO USE THE STEAM MOP"
section in this manual
2) Install the Garment Steamer Cloth onto the Window Cleaning/Garment Steaming Tool
and attach the Window Cleaning/Garment Steaming Tool to the Main Body as described in
the "How To Assemble the Optional Accessories" section in this manual.
3) Select one of the following Steam Regulator positions: 1 – Low or 2 – Medium when
using the Garment Steamer.
Do not use 3 – High and 4 - Hot Spray steam settings when using the Garment
Steamer.
You can change the Steam Regulator position and steam output while operating the
STEAM MOP.
4) Follow Step 3 described in the "How To Use the Hand-Hand Steamer" section in this
manual.
5) To steam a garment, place item of clothing on the hanger and steam the garment
directly.
Slowly slide the Garment Steamer Head vertically, from the
top to the bottom of the garment. You may also reverse this
motion and steam from the bottom to the top. Curtains and
draperies can be steamed while they are hanging.
NOTICE
Please refer to label on item of clothing to check if garment can be steamed. Some fabrics
like leather, suede, and velvet may not be suitable for steaming. If you are not sure then
steam a small part of the inside of the garment to test that it does not damage the fabric
before steaming the entire garment or fabric.
WARNING DANGER OF SCALDING
Do not touch the Garment Steamer Tool/Cloth during usage, as these components
can get extremely hot.
Keep the Extension Hose away from your body and avoid touching the hose as it
can get hot.
7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit,
refill the Water Tank and continue cleaning.
8) Once you finish cleaning allow the Garment Steamer Cloth to cool down and carefully
remove it from the Window Cleaning Tool, as the Garment Steamer
.
Cloth could still be hot.
WARNING DANGER OF SCALDING
Do not touch the Duster/Coral Cloth during usage, as these components can get extremely
hot. Keep the Extension Hose away from your body and avoid touching the hose as it can
get hot.
7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit,
refill the Water Tank and continue cleaning.
8) Once you finish cleaning allow the Lint Cloth to cool and carefully remove it from the
Window Cleaning Tool, as the Lint Cloth could still be hot.
32/53