SPORTSTECH IT200 Bedienungsanleitung Seite 10

EN
INSTALLATION ON INVERSION BANK IT200 + COMMISSIONING
The massage pad is intended for private use only and not for medical or commer-
cial use. The massage should always be a pleasant experience. If you find the mas-
sage uncomfortable or causing pain, please change the intensity of the massage
and/or adjust the tension of the arm loops to achieve a satisfactory level of comfort.
The massage pad is intended as additional support for the lumbar region when
using the IT200. Use the Velcro fasteners to attach the massage pad to the lower
part of the backrest of the inversion bank. Make sure that the power cord is not
caught in the IT200 or damaged in any way.
Before plugging into the main electricity mode
1. Remove the packaging material and all protective films.
2. Unwind the cable of the power plug completely to straighten it.
3. Insert the power connector into the Holstecker plug of the power supply connector.
4. Plug the power plug into a properly installed power outlet.
HEAT
MODE
TIME
POWER
HEAT
OPERATION
POWER HEAT BUTTON: Press this button to switch on the
device in the automatically preset mode (massage mode 1 /
intensity level 1). The device switches off automatically after 10
minutes. Use the other buttons to make further adjustments to the
settings. To switch off the device, press the Power Heat button for
at least 2 seconds.
TIME BUTTON: With this button you can choose between a mas-
sage time of 5 or 10 minutes. Do not switch the device on and off
INTENSITY several times in quick succession.
MODE BUTTON: You can switch between the 2 different massa-
ge modes A1 and A2 by pressing the button once or twice.
INTENSITY BUTTON: For the intensity of the massage, you can
choose between levels 1-3 by simply pressing the button three
times as desired.
10