Proklima 27465097 Bedienungsanleitung Seite 42

5. When the environment humidity is higher than 95%, it will show 95
OPERATING INSTRUCTIONS
1. The buzzer will buzzing when power on, and the machine will be
standby, the POWER indicator will be green. The POWER light can
be used as the indicator light for WIFI distribution when the machine
is powered off.
2. Press button once to start operation. Press it again to stop
operation.
3.press button as follows：
Press the bottom to adjust fan speed between high and low, and
corresponding indicator light will on at the same time.
4. Press to change the set value of humidity as follows:
By pressing to change the humidity setting value, the humidity
setting range is 40% ~ 80% and the interval is 5%.HUM indicator
light will turn on when humidity is set, and HUM light will turn off
when humidity is set for 5 seconds, Displays ambient humidity.
After a period of working,when environment humidity is lower than
the selected humidity by 2%, compressor will stop and fan stops
working 3 mintues later;When environment humidity is equel to or
higher than the selected humidity by 2%, compressor will
restart ,which means 3-minute compressor protection time`s over.
42