Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dimensions Bullerjan B² flex and B² flex BOX and B³ Keramik
Technische Daten
Nominal heal output
Permitted fuels
Energie-Effiziency
Energieclass
Flue gas nozzle
Height centre flue gas nozzle
External air supply
Height centre external air supply connection
Height
Width
Depth
Weight model steel
Weight model ceramic
Distances to combustible materials
Side
Front
Rear
1 Installation/Connection/Assembly
1.1 General information about the operation
of the Bullerjan B² flex
Bullerjan stoves of the B² flex series may only be operated
when the combustion chamber door is closed.
Important: The wood stove must not be structurally altered in
any way. Only spare parts that have been approved by the
Bullerjan GmbH may be installed. In case that the stove is
structurally changed or equipped with unauthorized spare
parts, any potential liability and warranty claims will be forfeited.
5 kW
wood logs 25 cm
118
A+
15 cm
113,5 cm
10 cm
51,5 cm
125,5 cm
41,8 cm
35,7 cm
130 kg
163,6 kg
40 cm
20 cm
80 cm
1.2 Installation
1.2.1 General requirements
When
the
B²
an exhaust system, the relevant, public law provisions,
in
particular
construction/building
regulations issued hereunder, have to be observed.
1.2.2 Combustion Air Supply
The installation room should have a volume of at least 4 m
per kW of nominal heat output.
flex is
installed
and connected to
the
provisions
of
the
codes
and
the
regional
fire
safety
3
16
Werbung
Inhaltsverzeichnis
