eichhorn Designer 2-in-1 Gebrauchsanleitung Seite 24

Hood:
The hood is fitted with the two half shells on the chassis. It is positioned on a small screw
(picture 19), on the right and left side, which hold the hood in place. If it has been firmly
positioned with slight pressure (picture 20), the angle of the convertible top is determined
by pressing down on the excentric levers on the outside of the hood (picture 21) - now it is
fixed in place.
Open/close hood:
The hood is opened or closed with the stretchers on each side (picture 22) - please do not
use force and always use both hands parallel (picture 23) so that it opens and closes
evenly.
Adjustment of angle of hood:
Left and right side of the hood you can find a small excenter (picture 21): if it is folded the
hood is in locked position, if it is horizontal the hood is loose and can be pulled into a
different angle.
While it is loose you can adjust the hood using both hands, a "clicking sound" is normal.
- 24 -